train.gif (19323 bytes)
 
MODULE ENGLISH MEDIA BM MEDIA
1
2
3
4
 
5
6

Practical Pneumatics 1
Practical Electro-Pneumatic 1
Programmable Logic Controllers 1
Maintenance of Pneumatics
System & Circuit Design
Programmable Logic Controllers 2
Workshop in Vacuum Technology 1

 Teknologi Pneumatik 1
Teknologi Pneumatik 2
Teknologi Pneumatik 3
Teknologi Pneumatik 4

Teknologi Pneumatik 5
Teknologi Pneumatik 6
     
SMTC P1   PRACTICAL PNEUMATIC 1
line.gif (1348 bytes)
           COURSE OBJECTIVES
Participants will have fulfilling (24 hours) course where by they will be to :-
1) Identify the needs of compressed air production and purification  in pneumatic control system.
2) Identify and use of control schematics.
3) Select correct pneumatic components and troubleshoot pneumatic circuits.

           TOPICS COVERED
1) Production processing and distribution of compressed air.
2) Logic YES/NO, AND, OR
3) Valves - 3/2, 5/2, 5/3, dual air pilot, single air pilot.
4) Speed controllers - Needle Valve, Throttle relief valve, quick exhaust valve,
5) Auto-return circuit
6) Start and Stop button auto-circuit
7) Interesting Pneumatic Components
8) Sizing of cylinder and valve for projects
9) Pneumatic Delay Timers
10) Positioning
 
SMCT EP 1    PRACTICAL ELECTRO-PNEUMATIC 1
line.gif (1348 bytes)
          COURSE OBJECTIVES
Participants will have fulfilling 4 days (24 hours) course whereby they will be to:
1) Identify the construction and function of the components in  electro pneumatic control systems.
2) Identify and use of control schematics.
3) Design, sizing and troubleshoting electro-pneumatic circuits.

          TOPICS COVERED
1) Economical and technical aspects of electro-pneumatic system.
2) Basic electric theory
3) Logic electric theory
4) Valves - 3/2, 5/2, 5/3, single and trouble solenoid valve
5) Relays and their applications
6) Delay Timers
7) Counters
8) Sequential circuit projects
9) Positioning
10) Sizing of cyclinder and valve for projects.
 
SMCT PLC 1    PROGRAMMABLE  LOGIC CONTROLLERS 1
line.gif (1348 bytes)
          COURSE OBJECTIVES
Participants will have fulfilling 4 days (24 hours) course whereby they will able to:
1) Identify the structure and operation of PLC
2) Identify the hardware configuration of the PLC
3) Design and write PLC program

          TOPICS COVERED
1) Background of PLC development
2) PLC hardware Design
3) Types of PLC System
4) PLC Programming (Ladder diagram)
5) Logic and sequence projects
6) Timer and Counter Applications
7) Procedure for selecting PLC Systems
8) PLC System Maintenance
9) Troubleshooting techniques
10) Practical Exercises
 
SMCT VT1    WORKSHOP IN VACUUM  TECHNOLOGY 1
line.gif (1348 bytes)
         COURSE OBJECTIVES
Participants will have fulfilling 2 days (12 hours) course whereby they will be able to:
1) Identify the construction and function of components used in a vacuum system
2) Identify and use of vacuum control system circuits
3) Basic design and troubleshooting of vacuum control system

          TOPICS COVERED
1) Vacuum Pump System
2) Peripherals in Vacuum System
3) Complete Vacuum System Circuit
4) Selecting of Vacuum Ejectors
5) Selection of Vacuum Pads
6) Practical
>> Next In Training
| Automation Training | Training Products |
Proposed Timetable for Courses
| Headquarter ||

 

For more information please contact 

Training Manager (Mr Erik)-03-56350590